Publications and Presentations

Publications and Presentations

2026

Tayefi, Masoud; Eesaee, Mostafa; Hassanipour, Meysam; Elkoun, Said; David, Eric; Nguyen-Tri, Phuong

Optimizing mechanical and electrical performance in EPDM composites for spacer dampers: A balanced approach via carbon black ratio and protective waxes Journal Article

In: Macromolecular Materials and Engineering, vol. 311, no. 3, pp. e00430, 2026.

BibTeX

2025

Tayefi, Masoud; Eesaee, Mostafa; Hassanipour, Meysam; Elkoun, Said; David, Eric; Nguyen-Tri, Phuong

Thermal aging behavior and lifetime prediction of industrial elastomeric compounds based on styrene–butadiene rubber Journal Article

In: Polymer Engineering & Science, vol. 65, no. 6, pp. 3226–3246, 2025.

BibTeX

Hamouda, Imen; Tayefi, Masoud; Eesaee, Mostafa; Hassanipour, Meysam; Nguyen-Tri, Phuong

Kinetic analysis of thermal degradation of styrene–butadiene rubber compounds under different aging conditions Journal Article

In: Journal of Composites Science, vol. 9, no. 8, pp. 420, 2025.

BibTeX

2023

Tayefi, Masoud; Eesaee, Mostafa; Hassanipour, Meysam; Elkoun, Said; David, Eric; Nguyen-Tri, Phuong

Recent progress in the accelerated aging and lifetime prediction of elastomers: A review Journal Article

In: Polymer Degradation and Stability, vol. 214, pp. 110379, 2023.

BibTeX

2022

Maou, Samira; Meftah, Yazid; Tayefi, Masoud; Meghezzi, Ahmed; Grohens, Yves

Preparation and performance of an immiscible PVC-HDPE blend compatibilized with maleic anhydride (MAH) via in-situ reactive extrusion Journal Article

In: Journal of Polymer Research, vol. 29, no. 5, pp. 161, 2022.

BibTeX

2020

Tayefi, Masoud; Razavi-Nouri, Mohammad; Sabet, Alireza

Using constrained mixture design method for optimizing the properties of organoclay filled ethylene-octene copolymer nanocomposites Journal Article

In: Materials Research Express, vol. 7, no. 1, pp. 015321, 2020.

BibTeX

Meftah, Yazid; Tayefi, Masoud; Fellouh, Fatma; Chouieur, Houria; Maou, Samira; Meghezzi, Ahmed

Influence of Alkali Treatment and Dune Sand Content on the Properties of Date Palm Fiber Reinforced Unsaturated Polyester Hybrid Composites. Journal Article

In: Journal of Composite & Advanced Materials/Revue des Composites et des Matériaux Avancés, vol. 30, no. 3/4, pp. 161, 2020.

BibTeX

2018

Heydarnezhad, Hamid Reza; Pourabbas, Behzad; Tayefi, Masoud

Conducting electroactive polymers via photopolymerization: a review on synthesis and applications Journal Article

In: Polymer-Plastics Technology and Engineering, vol. 57, no. 11, pp. 1093–1109, 2018.

BibTeX

2017

Razavi-Nouri, Mohammad; Tayefi, Masoud; Sabet, Alireza

Morphology development and thermal degradation of dynamically cured ethylene-octene copolymer/organoclay nanocomposites Journal Article

In: Thermochimica Acta, vol. 655, pp. 302–312, 2017.

BibTeX

Tayefi, Masoud; Razavi-Nouri, Mohammad; Sabet, Alireza

Influence of ordering and disordering of organoclay on rheological properties of uncured and cured ethylene-octene copolymer nanocomposites Journal Article

In: Applied Clay Science, vol. 135, pp. 206–214, 2017.

BibTeX

Razavi-Nouri, Mohammad; Sabet, Alireza; Tayefi, Masoud

Effect of dynamic curing time on thermal, mechanical and rheological behavior of organoclay-containing nanocomposite based on ethylene-octene copolymer Journal Article

In: Journal of Polymer Research, vol. 24, no. 7, pp. 101, 2017.

BibTeX

2016

Razavi-Nouri, Mohammad; Sabet, Alireza; Tayefi, Masoud; Imeni, Milad

Effect of Organoclay Ordering and Agglomeration on Morphology and Mechanical Properties of Uncured and Dynamically Cured Ethylene-Octene Copolymer Nanocomposites Journal Article

In: Macromolecular Materials and Engineering, vol. 301, no. 12, pp. 1513–1524, 2016.

BibTeX

2014

Tayefi, Masoud; RazaviYNouri, Mohammad; Sabet, Alireza

Ethylene-Octene Copolymer/Nanocaly Nanocomposites: II. A Review on Mechanical Properties and Rheology Journal Article

In: 2014.

BibTeX

Tayefi, Masoud; RazaviYNouri, Mohammad; Sabet, Alireza

Nanocomposites of Ethylene-Octene Copolymers and Clay Nanoplatelets: Part-1 A Review on Morphology, Crystallization and Thermal Properties Journal Article

In: 2014.

BibTeX

RAZAVI, NOURI MOHAMMAD; Sabet, Alireza; Tayefi, Masoud; others,

Effect of Dynamic Cross-Linking on Physical and Mechanical Properties of Nanoclay-Containing Nanocomposites Based on Ethylene-Octene Copolymer Journal Article

In: 2014.

BibTeX

Brevets

Razavi-Nouri M., Sabet A., Tayefi M., “Producing of Dynamic Cross-Linked Nanoclay-Containing Nanocomposites based on Ethylene-Octene Copolymer with different DCP percent”, Brevet IR, n° 90689, 2016.

Recherches et rapports techniques

Tayefi M., Razavi-Nouri M., Sabet A., “Study on the Effect of Curing on Physical and Mechanical Properties and Rheological Behavior of Poly(Ethylene-Co-Octene)/OMMT Nanocomposites”, 2014.

Tayefi M., “The Study of Nanocomposites of Polyethylene Containing Nanoclay, Nanotubes and Nanographene”, 2013.

Tayefi M., Hadi Z., “The Study of Electrospinning of Polyacrylonitrile Nanofibers”, 2012.

Expériences d’enseignement

2014-2016 : Logiciel OriginPro

Selected Paper Presentation at International Seminars

 

  1. 2025 Tayefi M., Eesaee M., Meysam Hassanipour, Nguyen-Tri P., Amélioration des propriétés mécaniques, mécanique dynamiques et de vieillissement des composites Éthylène-Propylène-Diène/noir des Carbone par zinc 2-mercapto-toluimidazole, Concours d’affiches de l’UQTR (Lauréat du deuxième prix), 2024.
  2. Tayefi M., Eesaee M., Nguyen-Tri P., Meysam Hassanipour, Application de la superposition temps-température aux propriétés mécaniques obtenues pour un composant industriel en caoutchouc soumis à un vieillissement thermique”, M2EBA 2024.
  3. Tayefi M., Eesaee M., Hassanipour M., Elkoun S., David E., Nguyen-Tri P., “Aging of Elastomeric Industrial Parts: Understanding Effect of Accelerated Aging on Mechanical Propertie”, M2EBA 2023.
  4. Razavi-Nouri M., Sabet A., Tayefi M., “Effect of Dynamic Cross-‎Linking on Physical and Mechanical ‎Properties of Nanoclay-‎Containing Nanocomposites Based on Ethylene-Octene Copolymer”, ‎‎11th ‎ISPST, 2014.‎